Note: If you are using an Android device that is running Android 7, 8, or 9 please click here for instructions on setting up your mobile hotspot.
Connecting the automed Device to the Android Essentials App
Step 1: Open the automed Essentials app.
Step 2: Clip the adapter to the automed device.
Step 3: Insert your battery into the device.
Step 4: Click Connect in the lower right corner of the app.
-Click Yes if you agree to the disclaimer (this will only appear on the first use).
-Click Yes to enable WiFi Access
Step 5: You will need to wait until you hear your device beep twice at you and a C will appear on the screen of your delivery device.
Reconfigure the Adapter
Step 1: Click the 3 dots in the upper right corner.
Step 2: Click Configure Adapter.
Step 3: Select your Device.
-Example: If you have multiple devices connected to the Essentials app look on the screen of the automed device for it to say D1, D2, or etc.
Step 4: Click Manual on the drop down menu.
Step 5: Type in the dose value that you want to set the adapter for:
Step 6: Click OK
-Your device will then beep at you and your LED light will turn green letting you know that your Delivery Device is ready to dose.
Step 7: Click Disconnect on the Essentials app.
Step 8: The device’s LED light will turn Red fo a second then turn back to Green to indicate it is ready for dosing.