Configuring Blank Adapter with iOS Essentials App and Set & Forget

Set & Forget, as the name suggests, allows the user to set-up the automed delivery device and adapter once using the Essentials app, and then continue dosing while leaving the app behind.

Note: If you have not connected your iPhone to the automed system before please click here for instructions on how to set up your Personal Hotspot.

Connecting the automed Device to the iOS Essentials App

Step 1: Open the automed Essentials app.

Step 2: Clip the adapter onto the automed device.

Step 3: Insert the battery into the device.

         a: Once the battery is inserted into the device, wait for the Blue Status Bar at the top of the iPhone to appear saying you have at least 1 connection.

Step 4: Click the Connect button in the Essentials app.

Configure a Blank Adapter

Step 1: Once the device is connected to the app, a popup will appear at the bottom of the app to Select the Dose Method.

Step 2: Select Manual.

Step 3: Type in the Dose Value.

         a: This is the amount in ml/cc that will be delivered with the automed device.

         b: Click Done.

Step 4: The dose will appear on the Essentials app screen.

Step 5: Click Disconnect on the Essentials app.

Step 6: The device’s LED light will turn Red for a second then turn back to Green to indicate it is ready for dosing.

A user is now able to dose animals with the automed device without being connected to the app.

Once an adapter is configured, the app does not need to be reconnected.  Clip the adapter onto the device, insert the battery and the device is ready to dose the set amount with that configured adapter.

If at any time you require further assistance, please contact our support department support@automed.io.

Still need help?

Can’t find the answer you’re looking for?
Don’t worry we’re here to help!

Request Support

Send us your question over email.

Phone

Send us your question over email.